Black Box ServSwitch DKM FX - 4 Configuration; Command Mode

Page 59
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
4.฀Configuration
4.1฀Command฀Mode
The ServSwitch DKM FX has a Command Mode that enables several functions via
keyboard command during normal use.
To enter Command Mode, use a hotkey sequence, and to exit Command Mode,
press <Esc>. While in Command Mode, the Shift and Scroll LEDs on the console
keyboard will flash.
NOTE: In Command Mode, normal keyboard and mouse operation will cease.
Only selected keyboard commands are available.
NOTE: If there is no keyboard command executed within 30 seconds after
activating Command Mode, it willl be automatically deactivated.
The following table lists the keyboard commands to enter and to exit Command
Mode and to change the hotkey sequence:
Table 4-1. Command mode components.
Function Keyboard command
Enter Command Mode (default) 2x <Right-Shift> (or hotkey)
Exit Command Mode <Esc>
Change hotkey sequence
<Left-Ctrl> + <Left-Shift> + <c>, <hotkey code>, <Enter>
Since 8/10/2011:
<current hotkey> + <c>, <new hotkey code>, <Enter>
NOTE: <Key> + <Key> = Press keys simultaneously; <Key>, <Key> = Press keys
successively, 2x <Key> = Press key quickly, twice in a row (similar to a
mouse double-click).