Page 108
724-746-5500 | blackbox.com
Chapter4:Configuration
Figure 4-44. Menu Definition—EXT Units screen.
You can select between the following buttons:
Table 4-30. OSD settings.
Button Function
New Create a new extender unit
Delete Delete an existing unit
Apply Confirm changes of an extender unit
Cancel Reject changes
1. To create a new extender unit, press the button “New.”
2. Select whether a template of an existing extender unit (“Choose extender as
template”), a template of an predefined extender type (“Choose extender
type”) or no template (“None”) should be used.
3. Press the “OK” button.
4. Set all relevant parameters for the extender unit.
5. Press the “Apply” button to save the new extender unit.
To Next Page
Loading...
