Page 150
724-746-5500 | blackbox.com
Chapter 5: Operation
JavaTool
Select “Switch > Switch Console to CPU” in the task area.
Figure 5-3. Menu Switch—Switch Console to CPU.
All connected consoles and the associated CPU connections are shown in columns
in the working area in this menu.
NOTE: Switching operations can only be performed in on-line mode, that means
an active network connection between the matrix and the Java tool is
needed.
To set a KVM connection between a console and a CPU, double-click on the
corresponding selection box within the CPU column and select the requested CPU
(green).
To set a video connection between a console and a CPU, double-click on the
corresponding selection box within the CPU column and select the requested CPU
(orange).
NOTE: CPUs whose respective console does not have access rights will not appear
in the list.
You can use the following button to perform a switching operation:
To Next Page
Loading...
