Black Box ServSwitch DKM FX - Page 40

Page 40
724-746-5500 | blackbox.com
Chapter 2: Overview
Table 2-27. Extender recognized.
Symbol Description
Port connected to a CPU unit
Port connected to a CON unit
Port connected to a USB 2.0 CPU unit
Port connected t a USB 2.0 CON unit
Port is configured as a CON port for customer-specific applications.
Port is configured as a CPU port for customer-specific applications.
•฀Red฀framed฀ports฀are฀defined฀as฀“fixed”฀(for฀example,฀for฀USB฀2.0฀connections).
•฀The฀port฀with฀four฀static฀blue฀squares฀is฀currently฀selected.
•฀฀If฀a฀port฀is฀selected,฀all฀the฀other฀ports฀will฀be฀shown฀transparently,฀except฀for฀
those ports that are connected to the currently selected port. To clear a selected
port, press the “Clear Selection” button.
•฀฀If฀there฀is฀a฀red฀cross฀shown฀on฀a฀port฀when฀switching฀by฀the฀matrix฀view,฀the฀
console chosen to be connected does not have access rights to the respective
CPU at this port.
NOTE: To show the extender information of the currently selected port in the right
part of the working area, press the left mouse button.
The information in Table 2-28 is available: