Page 76
724-746-5500 | blackbox.com
Chapter4:Configuration
JavaTool
Select “Assignment > Virtual CPU Devices” in the task area.
Figure 4-12. Menu assignment—Virtual CPU devices screen.
For an assignment, proceed as follows:
1. Select a virtual CPU in the “Virtual CPU” list.
2. Double-click in the “Real CPU” column to get a list of all available real CPUs.
3. Select a real CPU.
You can select between the following buttons:
Table 4-9. Selection buttons.
Button Function
Send Send assignments to the matrix
Reload Reload changes
NOTE: By activating the “Auto Send” function in the left lower corner of the
working area, switching operations will occur immediately without
pressing the “Send” button to confirm.
To Next Page
Loading...
