Page 79
724-746-5500 | blackbox.com
Chapter4:Configuration
JavaTool
Select “Assignment > Real to Virtual Console” in the task area.
Figure 4-15. Menu Assignment—Virtual Console Devices screen.
To place an assignment, proceed as follows:
1. Select the required real console in the “Real Console” table.
2. Double-click in the “Virtual Console” column to get a list of all available virtual
consoles.
3. Select the required virtual console.
You can select between the following buttons:
Table 4-10. Send and Cancel
selection buttons.
Button Function
Send Send assignments to the matrix
Cancel Reject changes
NOTE: If you activate the Auto Send function in the left lower corner of the
working area, switching operations will occur automatically without
pressing the Send button to confirm.
To Next Page
Loading...
