CHAPTER 4: ANALOG PORT OPERATION
31
Figure 4-7. Menu Dialog Box
To choose the default display order of servers:
1. Select Name to display servers alphabetically by name.
-or-
Select EID to display servers numerically by EID number.
-or-
Select Port to display servers numerically by port number.
2. Click OK.
To set a Screen Delay Time for the OSD:
1. Type in the number of seconds (from Ø-9) to delay the OSD display after you
press
Print Screen. Entering Ø will instantly launch the OSD with no delay.
2. Click OK.
Setting a Screen Delay Time allows you to complete a soft switch without the OSD
displaying. To perform a soft switch, see Soft switching in this chapter.
Controlling the status flag
The status flag displays on your desktop and shows the name or EID number of the
selected server or the status of the selected port. Use the Flag dialog box to
configure the flag to display by server name or EID number, or to change the flag
color, opacity, display time and location on the desktop.
To Next Page
Loading...
