CHAPTER 7: FLASH UPGRADES
55
4. The SAM Upgrade dialog box appears. Click OK to initiate the upgrade and
return to the SAM Status dialog box.
Figure 7-2. SAM Upgrade Dialog Box
To upgrade SAM fi rmware individually:
1. If the OSD is not open, press
Print Screen. The Main dialog box will appear.
2. Click Commands - Display Versions. The Version dialog box appears.
Figure 7-3. Version Dialog Box
3. Click SAM to view individual cable version information. The SAM Selection
dialog box appears.
Figure 7-4. SAM Selection Dialog Box
To Next Page
Loading...
