SERVSELECT IP™ INSTALLER/USER GUIDE
56
4. Select a SAM to upgrade and click the Version button. The SAM Version dialog
box appears.
Figure 7-5. SAM Version Dialog Box
5. Click the Load Firmware button. The SAM Load dialog box appears.
Figure 7-6. SAM Load Dialog Box
6. Click OK to initiate the upgrade and return to the SAM Status dialog box.
NOTE:
During an upgrade, the SAM status indicator in the Main dialog box will be yellow. The SAM
is unavailable while an upgrade is in progress. When an upgrade is initiated, any current
connection to the server or serial device via the SAM or serial SAM will be terminated.
To Next Page
Loading...
