Wi-Fi
Connect to a Wi-Finetwork
When you connect to a Wi-Fi network, your BlackBerry device saves the network information. The next time you're within
range of the saved
Wi-Fi network, your device will connect automatically.
1. On the Settings screen, tap Wi-Fi.
2. If the Wi-Fi switch is Off, tap it to On.
3. Tap a network.
4. If the network requires a username or password, enter the username or password.
5. Tap Connect.
Use Wi-Fi Protected Setup to connect to a Wi-Fi network
Wi-Fi Protected Setup simplifies the connection process by allowing you to use a button on your router or a PIN to connect
to a secure Wi-Fi network instead of using names and passwords.
On the Wi-Fi Settings screen, swipe left and tap Wi-Fi Protected Setup (WPS).
• To use the Wi-Fi Protected Setup button on your router, tap Press WPS Button on Router. Press the button on your
router, then, on your BlackBerry device, tap Start.
• To use a PIN, tap Enter PIN into Router. Tap Start and then enter the PIN that appears on your device into your router.
Manually connect to a Wi-Fi network
If you want to connect to a hidden Wi-Fi network you can connect manually.
1. On the Wi-Fi screen, swipe left and tap Add Network Manually.
2. Enter the SSID, select the network's security type and specify any additional information.
3. Tap Connect.
Delete a saved Wi-Fi network
If you have a lot of saved networks on your BlackBerry device and you don't use them all, you can delete some to tidy up
your Saved Networks screen.
User Guide
RIM Strictly Confidential
Connections
111
To Next Page
Loading...
