What to do if my Blackfin Boat engine will not start with the shift control lever in neutral?
First, try moving the shift lever slightly to ensure it's in the neutral detent. Inspect the wires on the neutral safety switch on the control and repair any loose connections. If these steps don't work, there may be a problem with the electronic control system, and you should have the system serviced by a qualified marine technician.
What to do if my Blackfin 272CC wanders and will not hold a course at cruise speeds?
This issue could be due to air in the steering system, which requires you to fill and bleed the system. Another cause could be a corroded or misadjusted engine steering tab, so replace or adjust it. Finally, a binding engine steering spindle can cause wandering, so grease the spindle.
General safety equipment information and regulatory compliance.
Details USCG required safety equipment for passenger safety.
Guidance on dealing with dangerous bilge and fuel fires.
Importance of first aid preparedness and kit contents.
Examples and importance of caution and warning labels on the boat.
General principles for boat operation and safety.
Essential navigation rules and right-of-way for safe operation.
Comprehensive pre-departure checklist for safety and readiness.
Procedures for operating the boat, including engine startup and shutdown.
Techniques and considerations for docking and using dock lines.
Procedures for grounding, towing, and assisting distressed vessels.
Procedures for recovering a person who has fallen overboard.
Overview of the boat's 4-cycle outboard engine systems.
Information on preventing marine growth and galvanic corrosion.
Details on propeller types, sizing, and replacement.
Troubleshooting performance problems related to propeller selection.
Overview of helm station instruments for monitoring engine operation.
Overview of helm control systems: throttle, steering, trim tabs.
Description of cable and electronic engine throttle/shift control systems.
Information on hydraulic and electronic steering systems.
Operation of optional joystick control systems for maneuvering.
Maintenance requirements for hydraulic and electronic control systems.
Overview of the boat's EPA-compliant gasoline fuel system.
Procedures for safe and proper fueling of the boat.
Routine maintenance for fuel system connections, filters, and fuel quality.
Overview of the boat's 12V DC and optional 120V AC electrical systems.
Information on battery switches, isolators, and battery management.
General information on DC circuit protection using breakers and fuses.
Operation and connection procedures for the 120V AC battery charging system.
Procedures for filling, priming, and operating the fresh water system.
Routine maintenance for the fresh water system, including strainer cleaning and sanitizing.
Operation of the raw water pump and washdown system.
Operation and maintenance of the livewell (baitwell) system.
Routine maintenance for the raw water system, including hoses, strainers, and seacocks.
General overview of thru-hull drainage fittings.
Drainage of cockpit sole, fishboxes, and prep station sink.
Operation and testing of aft and forward bilge pumps.
Maintenance of cockpit drains, hardtop drains, and bilge pumps.
Ventilation of the head compartment via door and window.
Operation of the power actuated opening panel at the windshield top.
Details on deck rails, hardware fittings, cleats, and hawse pipes.
Description and maintenance of the anchor and rope locker.
Operation and storage of the windlass and bow roller assembly.
Description of cockpit features like hatches, doors, and latches.
Details on helm seats, bolster function, and the bait prep station.
Description of the center console, helm station, and windshield.
Description of the head compartment, its amenities, and storage.
Description and operation of the portable marine head system.
Operation and features of the optional porcelain marine toilet.
Procedures for cleaning the hull, preventing marine growth, and maintaining gelcoat.
Cleaning and care for upholstery, canvas, and enclosures.
Proper engine and fuel maintenance for performance and reliability.
Procedures for preparing the boat for storage and lay-up.
Procedures for winterizing the fresh water, raw water, and marine toilet systems.
Procedures for recommissioning the boat after storage.
Schematic diagrams of the helm switch panel (front and back).
Wiring schematics for hull, deck, console, and hardtop harnesses.
Schematic diagrams of the battery switch panel (parts 1 and 2).
Troubleshooting slow, erratic, or hard hydraulic steering.
Diagnosing and fixing issues with boat wandering or sluggishness.
Resolving engine starting issues when the control is in neutral.
Diagnosing causes for reduced boat speed, RPM, or vibration.
Troubleshooting engine overheating and alternator charging problems.
Troubleshooting common issues with pumps, head, and bilge systems.
General| Length Overall | 27'2" |
|---|---|
| Length | 27'2" |
| Beam | 9' 6" |
| Fuel Capacity | 90 gal |
| Deadrise | 20° |
| Maximum Horsepower | 600 hp |
| Max Horsepower | 600 hp |
| Passenger Capacity | 12 |
To Next Page
