Need help?Do you have a question about the Blackmagicdesign Teranex Series and is the answer not in the manual?
General| Frame Rate Conversion | Yes |
|---|---|
| Up Conversion | Yes |
| Down Conversion | Yes |
| Cross Conversion | Yes |
| De-interlacing | Yes |
| Aspect Ratio Conversion | Yes |
| Video Inputs | SDI, HDMI |
| Video Outputs | SDI, HDMI |
| Audio Inputs | Analog Audio |
| Audio Outputs | Analog Audio |
| Reference Input | Yes |
| Remote Control | Ethernet |
| Supported Resolutions | SD, HD |
| Processing Features | Noise Reduction, Detail Enhancement |
| Form Factor | Rackmountable |
Instructions for connecting power, video, and audio signals to the Teranex processor.
Steps to set video input, output format, frame rate, and aspect ratio for conversions.
Guide to configuring processing latency modes for the Teranex AV for live or post-production.
Procedures for downloading and installing the Blackmagic Teranex Setup software.
Steps to connect the Teranex processor via USB and update its internal software.
Identifies and describes the physical connectors on the Teranex Express model.
Details the various input and output connectors available on the Teranex AV.
Lists and explains the physical connectors found on the Teranex 2D model.
Provides a breakdown of the connectors and their functions on the Teranex 3D.
Explains how to navigate and change settings using the processor's front panel controls and overview.
Describes how to remotely configure Teranex processors using the Blackmagic Teranex Setup utility.
Details how to save and recall custom conversion settings using the preset functionality.
Illustrates how 4:3 SD images are converted to 16:9 HD frames with different aspect ratio settings.
Shows how 16:9 HD images are scaled to 4:3 SD frames with various aspect ratio adjustments.
Demonstrates the steps for converting video to a higher resolution, including input and output settings.
Guides through converting video to a lower resolution, covering input, output, and aspect ratio settings.
Explains changing resolution/aspect ratio and video frame rates between different standards.
Explains video output adjustments like color, clipping, and aspect ratio settings.
Covers audio output mapping, gain, delay, and input selection for audio channels.
Details configuration of closed captions, timecode, and video indexing features.
Covers network configuration, factory resets, and reference settings for the processor.
Explains the different 3D processing modes like Convert, 2D to 3D, and 3D Align.
Details tools for aligning stereoscopic images including position, rotation, and flip adjustments.
Guides for capturing video using editing software like DaVinci Resolve, Avid, and Final Cut Pro.
Explains how to play back captured clips through the Teranex processor using various editing software.
Describes the different scope displays for monitoring video and audio levels and their interpretation.
Explains how to use UltraScope to log and monitor errors in video and audio during operation.
Tables detailing supported input and output format conversions across different Teranex models.
Overview and details of the Ethernet protocol for remote control of Teranex processors.
Lists and explains commands for controlling specific Teranex functions like alignment and aspect ratio.
Information on accessing online support, forums, and contacting Blackmagic Design support.
Important safety warning regarding potential electric shock hazards within the unit.
Details the terms and conditions of the product's limited warranty period and coverage.
To Next Page
