Blaupunkt Brisbane SD48 - Adjusting TREBLE; Adjusting E-BASS

"BASS" and the currently set value for the
level are displayed.
.... Press the v or /\ button CD to change
the value.
When you have finished making your
changes,
.... press the MENU button@.
To exit the menu,
.... press the ESC button @.
Adjusting TREBLE
To adjust the level of the treble,
.... press the MENU button @.
The display shows "MENU".
.... Press the v or /\ button CD repeatedly
until "AUDIO" appears on the display.
.... Press the> button CD to call up the
audio menu.
"BASS" appears on the display.
.... Press the v or /\ button CD repeatedly
until "TREBLE" appears on the display.
.... Press the> button CD to call up the
submenu.
"TREBLE" and the currently set value for the
level are displayed.
.... Press the v or 7\ button CD to change
the value.
When you have finished making your
changes,
.... press the MENU button @.
To exit the menu,
.... press the ESC button @.
Sound
Adjusting E -BASS
To set the frequency and the quality factor
of the bass,
.... press the MENU button@.
The display shows "MENU".
.... Press the v or /\ button CD repeatedly
until "AUDIO" appears on the display .
....
Press the> button CD to call up the
audio menu.
"BASS" appears on the display.
.... Press the v or /\ button CD repeatedly
until "ENHANCED" appears on the dis~
play.
.... Press the> button CD to call up the
submenu .
"E-BASS" appears on the display.
.... Press the> button CD to call up the
submenu.
"FREO" and the currently set value are dis-
played .
....
Press the ~ or /\ button CD to se-
lect between "FREO" (frequency) and
"OFAC" (quality factor).
.... Press the < or > button CD to change
the selected setting.
When you have finished making your
changes,
.... press the MENU button @.
To exit the menu,
.... press the ESC button @.
I 25