Blaupunkt Brisbane SD48 - Adjusting E-TREBLE; Adjusting E-MIDDLE

Sound
Adjusting E-TREBLE
To adjust the frequency of the treble,
... press the MENU button@.
The display shows "MENU".
... Press the v or 7\ button CD repeatedly
until "AUDIO" appears on the display.
... Press the> button CD to call up the
audio menu.
"BASS" appears on the display.
... Press the v or 7\ button CD repeatedly
until "ENHANCED" appears on the dis-
play.
... Press the> button CD to call up the
submenu.
"E-BASS" appears on the display.
... Press the v or 7\ button CD repeat-
edly until "E-TREBLE" appears on the
display.
... Press the> button CD to call up the
submenu.
"FREQ" (frequency) and the currently set
value are displayed.
... Press the < or > button CD to change
the selected setting.
When you have finished making your
changes,
... press the MENU button @.
To exit the menu,
... press the ESC button @.
26 I
Adjusting E-MIDDLE
To set the gain, the frequency and the qual-
ity factor of the middle,
... press the MENU button@.
The display shows "MENU".
... Press the v or 1\ button CD repeatedly
until "AUDIO" appears on the display .
... Press the> button CD to call up the
audio menu.
"BASS" appears on the display.
... Press the ~ or 1\ button CD repeatedly
until "ENHANCED" appears on the dis-
play .
... Press the> button CD to call up the
submenu.
liE-BASS" appears on the display.
... Press the v or 1\ button CD repeat-
edly until "E-MIDDLE" appears on the
display .
... Press the> button CD to call up the
submenu.
"GAIN" and the currently set value are dis-
played.
... Press the v or 1\ button CD to select
between "GAIN", "FREQ" (frequency)
and "QFAC
II
(quality factor).
... Press the < or > button CD to change
the selected setting.
When you have finished making your
changes,
... press the MENU button @.
To exit the menu,
... press the ESC button @.