129
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
User settings
SVENSKA
The colour seek is started. "AUTO COLOR-
SCAN" appears on the display.
Press the OK button
2 to select the
current colour, or press the DIS•ESC
button
; to cancel the colour seek
without selecting a new colour.
Switching the continuous colour change
for the display illumination on/off
(CON SCAN )
You can select a constant colour change as
the colour of the display illumination. If the
colour change is activated, the display col-
our changes constantly. The colour change
is switched on or off in the system menu.
In the System menu, press the rocker
switch
or : repeatedly until the
"CON SCAN" menu item is selected.
Press the OK button
2 to call up the
menu item.
Switch between the settings with the
rocker switch
or :.
"CONTINUOUS COLSCAN" :
Colour change is on.
"CONTINUOUS COLSCAN" :
Colour change is off.
Press the OK button
2 to select a dif-
ferent function, or press the DIS•ESC
button
; to exit the menu.
쏅
쏅
쏅
쏅
•
•
쏅
Changing the scan time
(SCANTIME )
The scan time of the SCAN function can be
adjusted in the System menu for all audio
sources between 5 and 30 seconds.
In the System menu, press the rocker
switch
or : repeatedly until the
"SCANTIME" menu item is selected.
Press the OK button
2 to call up the
menu item.
The current setting is displayed.
Use the rocker switch
or : to
select the desired setting in 5-second
increments between 5 and 30.
Press the OK button
2 to select a dif-
ferent function, or press the DIS•ESC
button
; to exit the menu.
쏅
쏅
쏅
쏅
02BA_HamburgMP68_gb.indd 12902BA_HamburgMP68_gb.indd 129 03.03.2008 8:59:03 Uhr03.03.2008 8:59:03 Uhr
To Next Page
Loading...
