Blaupunkt Hamburg MP68 User Manual

131
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKA
meric keys 9 while switching on the
device.
The version display with information about
the software appears.
Press the rocker switch
or : to
change between device components.
To exit the version display,
use the rocker switch
or : to
select the "EXIT" menu item.
Press the OK button
2.
The display of the audio source previously
listened to is displayed.
Updating the device software
You can update the software of this device
without removing it. New software versions
can be found on the Internet under www.
blaupunkt.com. The software is transferred
to the device with a USB data carrier.
Note:
Please observe the information obtained
at www.blaupunkt.com for handling the
downloaded file and for installing the
software on your device.
To start the installation,
connect the USB data carrier with the
new software to the device.
Press the MENU button
6.
Press the
rocker switch : to open
the "Syst" system menu.
In the System menu, press the rocker
switch
or : repeatedly until the
"SW DNL" menu item is selected.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Press the OK button
2 to start install-
ing the new software.
쏅
Additional settings
02BA_HamburgMP68_gb.indd 13102BA_HamburgMP68_gb.indd 131 03.03.2008 8:59:04 Uhr03.03.2008 8:59:04 Uhr

Blaupunkt Hamburg MP68 Specifications

General

MP3 playback	Yes
DVD Audio playback	No
Output power	50 W
Product color	Black
Frequency range	35 - 16000 Hz
Audio output channels	4.0 channels
Equalizer bands quantity	3
File type	MP3, WMA
Key illumination color	Red

Weight and Dimensions

Dimensions (WxDxH)	50 x 179 x 150 mm