Blaupunkt Kingston MP47 User Manual

50
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
Note:
You can use the volume control 4 to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Switching the confi rmation beep
on/off
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU/OK button ;.
Press the
or button < repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Switch the BEEP ON or OFF with the
or button 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
Automatic Sound
This function automatically adjusts the vol-
ume of the car sound system to the vehicle
speed. For this purpose, the car sound sys-
tem must be connected as described in the
installation instructions.
You can adjust the automatic sound in 6
increments from (0 - 5).
Press the MENU/OK button ;.
Press the
or button < repeatedly
until "AUTO SD" appears on the display
with the current setting.
Press the MENU/OK button ; to open
the menu.
Set the automatic sound 0 - 5 with the
or button <.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
Note:
The optimum setting for the speed-
dependent volume adjustment feature
depends on how noise levels develop in
your particular vehicle. Determine the
perfect value for your vehicle using trial
and error.
쏅
쏅
쏅
쏅
쏅
Volume
02_KingstonMP47_eng.indd 5002_KingstonMP47_eng.indd 50 23.01.2007 16:41:17 Uhr23.01.2007 16:41:17 Uhr

Blaupunkt Kingston MP47 Specifications

General

Audio system	FM, MW, LW
MP3 playback	Yes
DVD Audio playback	No
Output power	45 W
Product color	Black
Frequency range	35 - 16000 Hz
Audio output channels	4.0 channels
Equalizer bands quantity	3
Key illumination color	Red