67
ENGLISH
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
press the MENU/OK button ;.
Press the
or button < repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
Press the
or button 9 to switch
the display between CLOCK ON and
CLOCK OFF.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
Sound
You can perform the sound settings (bass,
middle and treble) separately for every
source (radio, CD, CD changer, USB, AUX,
traffi c announcement and telephone/navi-
gation). The volume distribution settings
(balance and fader) and X-BASS apply to
all the audio sources except for traffi c an-
nouncements and telephone/navigation.
You can adjust the volume distribution set-
tings separately for traffi c announcements
and telephone/navigation.
Note:
The settings of the sound for traffi c an-
nouncements and telephone/naviga-
tion can only be made during a traffi c
announcement or during a telephone
call/voice output.
This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and middle
and to adjust the level for the selected fre-
quency between -7 and +7. In addition, you
can adjust the quality factor for bass and
middle.
Note
The quality factor determines the fi lter
quality of the equalizer, i.e. the edge
steepness and fi lter bandwidth, de-
pendent upon the characteristic fre-
quency.
A low quality factor means a low edge
steepness and a high fi lter bandwidth;
a high quality factor means a high edge
steepness and a low fi lter bandwidth.
Clock – Time Sound
02_KingstonMP47_eng.indd 6702_KingstonMP47_eng.indd 67 23.01.2007 16:41:22 Uhr23.01.2007 16:41:22 Uhr
To Next Page
Loading...
Need help?
General
