65
ENGLISH
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
press the 4 RPT button 8 once or
several times until "RPT TRACK" is dis-
played.
The display shows the RPT symbol.
To repeat the current CD,
press the 4 RPT button 8 once or
several times until "RPT DISC" is dis-
played.
The display shows the RPT symbol.
Cancelling Repeat
To stop the current track or current CD from
being repeated,
press the 4 RPT button 8 once or sev-
eral times until "RPT OFF" is displayed.
The RPT symbol disappears from the dis-
play.
Random track play (MIX)
To play the tracks on the current CD in ran-
dom order,
press the 3 MIX button 8 once or sev-
eral times until "MIX CD" is displayed.
The display shows the MIX symbol.
To play the tracks on all inserted CDs in ran-
dom order,
press the 3 MIX button 8 once or sev-
eral times until "MIX ALL" is displayed.
The display shows the MIX symbol.
쏅
쏅
쏅
쏅
쏅
Cancelling MIX
press the 3 MIX button 8 once or sev-
eral times until "MIX OFF" is displayed.
The MIX symbol disappears from the dis-
play.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
Press the MENU/OK button ; for
longer than two seconds.
The next track will then be scanned. "SCAN"
and the current track number are intermit-
tently shown on the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Stopping Scan
To stop scanning,
briefl y press the MENU/OK button ;.
The currently played track will then contin-
ue to be played normally.
Interrupting playback (PAUSE)
Press the button 5 8.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button 5
8.
Playback is continued.
쏅
쏅
쏅
쏅
쏅
CD-changer mode
02_KingstonMP47_eng.indd 6502_KingstonMP47_eng.indd 65 23.01.2007 16:41:21 Uhr23.01.2007 16:41:21 Uhr
To Next Page
Loading...
