Blaupunkt Kingston MP47 - Random Track Play (MIX); Scanning Tracks (SCAN); Repeating Tracks (REPEAT); Interrupting Playback (PAUSE)

58
Random track play (MIX)
Press the 3 MIX button 8.
"MIX ALL" appears briefl y on the display and
the MIX symbol is displayed. The next ran-
domly selected track will then be played.
Cancelling MIX
Press the 3 MIX button 8 again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press the MENU/OK button ; for
longer than two seconds.
The next track will then be scanned. "SCAN"
and the current track number are intermit-
tently shown on the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
To end the scanning process,
press the MENU/OK button ;.
The currently scanned track will then con-
tinue to be played normally.
쏅
쏅
쏅
쏅
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button 8.
"RPT TRACK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate Repeat.
Cancelling Repeat
If you want to cancel the repeat function,
press the 4 RPT button 8 again.
"RPT OFF" appears briefl y on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Interrupting playback (PAUSE)
Press the button 5 8.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button 5
8.
Playback is continued.
Confi guring the display
You can choose from various display op-
tions in CD mode:
Track number and playing time
Track number and time
To switch between the display options,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
•
•
쏅
CD mode
02_KingstonMP47_eng.indd 5802_KingstonMP47_eng.indd 58 23.01.2007 16:41:19 Uhr23.01.2007 16:41:19 Uhr