70
Adjusting equalizer middle
(E-MIDDLE)
You can select 1 of 4 middle frequencies
(0,5 Hz, 1 Hz, 1,5 Hz, 2,5 Hz) and set the
level for the selected frequency between -7
and +7. You can also set the quality factor
between 0.5 and 1.25.
Adjusting middle frequency, level and
quality factor
Press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeat-
edly until "ENHANCED" appears on the
display.
Press the MENU/OK button ;.
"E-BASS" appears on the display.
Press the
or button < repeat-
edly until "E-MIDDLE" appears on the
display.
Press the
button 9 to open the
E-Middle menu.
"GAIN" and the current setting appear on
the display.
Press the
or button < to switch
between "GAIN" (level), "FREQ" (mid-
dle frequency) and "QFAC" (quality
factor).
Set the level, middle frequency and
quality factor each with the
or but-
ton 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting equalizer treble
(E-TREBLE)
You can select 1 of 4 treble frequencies
(10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz).
Note:
For further information on setting the
treble level, please read the section
entitled "Adjusting the treble" in this
chapter.
Adjusting the treble frequency
Press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeat-
edly until "ENHANCED" appears on the
display.
Press the MENU/OK button ;.
"E-BASS" appears on the display.
Press the
or button < repeat-
edly until "E-TREBLE" appears on the
display.
Press the
button 9 to open the
E-Treble menu.
"FREQ" and the current setting appear on
the display.
Set the treble frequency with the
or
button 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
02_KingstonMP47_eng.indd 7002_KingstonMP47_eng.indd 70 23.01.2007 16:41:22 Uhr23.01.2007 16:41:22 Uhr
To Next Page
Loading...
