59
ENGLISH
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist and
the album.
The CD text is shown as scrolling text on the
display with every track change.
Switching CD text on/off
Press the MENU/OK button ;.
Press the
or button < repeatedly
until "CDTEXT" appears on the display
with the current setting.
Select between the options "CDTEXT
ON" (display CD text) or "CDTEXTOFF"
(do not display CD text) with the
or
button 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
Traffi c announcements in CD
mode
If you wish to receive traffi c announcements
in CD mode,
Press the TRAF button :.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol. For further details, please read the
chapter entitled "Traffi c information".
쏅
쏅
쏅
쏅
쏅
Ejecting a CD
Press the button 1.
The control panel opens to the bottom.
Press the button
> next to the CD
compartment.
The CD is ejected.
Remove the CD and close the control
panel.
Notes:
If a CD is ejected, the drive will auto-
matically draw it back in again after
10 seconds.
You can also eject CDs whilst the de-
vice is switched off or whilst another
audio source is activated.
쏅
쏅
쏅
•
•
CD mode
02_KingstonMP47_eng.indd 5902_KingstonMP47_eng.indd 59 23.01.2007 16:41:20 Uhr23.01.2007 16:41:20 Uhr
To Next Page
Loading...
