69
ENGLISH
Press the or button < to adjust
the level between -7 and +7.
To exit the menu,
press the ESC/DIS button 5.
Setting the left/right volume
distribution (BALANCE)
To adjust the left/right volume distribution,
press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeat-
edly until "BALANCE" appears on the
display.
Press the MENU/OK button ; to open
the menu.
Press the
or button < to adjust
the balance (right/left).
To exit the menu,
press the ESC/DIS button 5.
Adjusting the front/rear volume
distribution (FADER)
To adjust the front/rear volume distribu-
tion,
press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeatedly
until "FADER" appears on the display.
Press the MENU/OK button ; to open
the menu.
Press the
or button < to adjust
the volume distribution front/rear.
To exit the menu,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting equalizer bass (E-BASS)
You can select 1 of 4 bass frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz) and set the
quality factor between 1.0 and 2.0.
Note:
For further information on setting the
bass level, please read the section en-
titled "Adjusting the bass" in this chap-
ter.
Adjusting bass frequency and quality
factor
Press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeat-
edly until "ENHANCED" appears on the
display.
Press the MENU/OK button ;.
"E-BASS" appears on the display.
Press the
button 9 to open the
E-Bass menu.
"FREQ" and the current setting appear on
the display.
Press the
or button < to switch
between the setting options "FREQ"
(bass frequency) and "QFAC" (quality
factor).
Set the bass frequency and quality fac-
tor each with the
or button 7.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
02_KingstonMP47_eng.indd 6902_KingstonMP47_eng.indd 69 23.01.2007 16:41:22 Uhr23.01.2007 16:41:22 Uhr
To Next Page
Loading...
