Blaupunkt MEMPHIS MP66 Operating And Installation Instructions

General functions
14
Adjusting the volume
WARNING!
Danger from excessive
volume!
Excessive volume can damage
your hearing and you may fail to
hear acoustic warning signals!
Do not change the volume
while the device changes the
CD in the CD changer or the
audio source.
Always set the device to a mod-
erate volume.
Turn the volume control
5.
The current volume is shown
on the display and used for all
audio sources.
Note:
To preset the volume of a con-
nected telephone (Phone) or
the signal tone (Beep), see
page 49.
➔
➔
➔
Muting the device
The device can be muted as fol-
lows:
Briefl y press the On/Off but-
ton
4.
The display shows "MUTE".
To cancel the mute function:
Briefl y press the On/Off but-
ton
4 again or turn the volume
control
5.
Operation with telephone
If a hands-free system is installed
in your vehicle or your cell phone
is connected to the device via a
Bluetooth adapter, the device re-
sponds as follows to incoming or
outgoing telephone calls:
The voice of the person calling
you is played back via the loud-
speakers of the vehicle.
The display shows "Phone call".
The currently playing audio
source is muted.
During the telephone call, you
change the volume of the tele-
phone call by means of the vol-
ume control
5.
➔
➔
•
•
•
•
01_BA_Memphis_US_gb.indd AllgFkt1401_BA_Memphis_US_gb.indd AllgFkt14 05.09.2007 9:58:07 Uhr05.09.2007 9:58:07 Uhr

Blaupunkt MEMPHIS MP66 Specifications

General

Audio system	FM/MW/LW
MP3 playback	Yes
DVD Audio playback	No
Output power	50 W
Product color	Black
Audio output channels	4.0 channels
Equalizer bands quantity	6
Display type	TFT

Weight and Dimensions

Dimensions (WxDxH)	179 x 52 x 160 mm