Blaupunkt MEMPHIS MP66 - Changing the Tuner Settings (Tuner Menu); Changing the Waveband (Band); Toggle between Mono and Stereo Operation (Mono)

ENGLISH
Operating the tuner
27
Changing the tuner settings ( "Tuner" menu)
The "Tuner" menu allows you to change the basic settings of the tuner.
To open the "Tuner" menu:
Press the TUNER button
2. The "Tuner" menu appears.
The "Tuner" menu consists of two pages which can be toggled with the
NEXT button
6.
➔
Changing the waveband ( Band)
The tuner can receive FM and AM.
To switch between these wave-
bands:
In the "Tuner" menu, select the
"Band" menu item.
The "Band" menu appears.
Select the desired band.
: This waveband is select-
ed. The previously played
station of this waveband is
played back.
: This waveband is not se-
lected.
➔
➔
•
•
You can now do the following in
this waveband:
Searching stations (see page
23)
Storing stations (see page 25)
Calling up stored stations (see
page 25)
Toggle between mono and stereo
operation ( Mono)
If you selected the "FM" wave-
band, you can toggle between
mono and stereo operation.
•
•
•
01_BA_Memphis_US_gb.indd Tuner2701_BA_Memphis_US_gb.indd Tuner27 05.09.2007 9:58:10 Uhr05.09.2007 9:58:10 Uhr