Changing basic settings in the settings menu
44
In the four frequency bands
"EQ High 1" to "4", you can se-
lect one centre frequency each
from 320 to 20,000 Hz.
On the rocker switch 3, press .
The level display (dB) is high-
lighted.
Select the level of the previ-
ously set centre frequency by
pressing on
or on the rock-
er switch
3.
The level change is displayed
in the frequency spectrum. The
sound changes accordingly.
On the rocker switch 3, press .
The quality factor Q is high-
lighted.
Select the desired quality fac-
tor Q by pressing on
or on
the rocker switch
3.
"Q1": Low edge steepness,
wide fi lter bandwidth
"Q2": Medium edge steep-
ness and fi lter bandwidth
"Q3": High edge steepness,
narrow fi lter bandwidth
The change is displayed in
the frequency spectrum. The
sound changes accordingly.
Press the OK button
A.
Your user-defi ned equalizer set-
ting is saved.
➔
➔
➔
➔
•
•
•
➔
Which equalizer setting is the
correct one?
Sound impression
or problem
Measure
Centre
frequen-
cy (Hz)
Level
(dB)
Unclean bass,
droning, unpleas-
ant pressure
125–400 approx.
–4
Very transparent,
aggressive sound,
no stereo effect
1000–
2500
approx.
–4 to –6
Muffl ed sound,
low transparency,
instruments do
not excel
8000–
12500
approx.
+4 to +6
Insuffi cient bass 50–100 approx.
+4 to +6
Selecting a sound preset ( Presets)
This menu item allows you to se-
lect one of the following sound
presets: Vocal, Disco, Rock, Jazz,
or Classic.
Press the softkey located next
to the desired sound preset.
: The sound preset is se-
lected.
: The sound preset is not
selected.
Setting the speed-dependent
volume increase ( Auto Sound)
When you are driving faster, the
device can automatically increase
the volume to compensate for the
driving noise. In order for this to
work, the speedometer signal
must be connected as described
➔
•
•
01_BA_Memphis_US_gb.indd Menü4401_BA_Memphis_US_gb.indd Menü44 05.09.2007 9:58:12 Uhr05.09.2007 9:58:12 Uhr
To Next Page
Loading...
Need help?
General
Weight and Dimensions
