EasyManuals Logo

Blaupunkt MEMPHIS MP66 Operating And Installation Instructions

Blaupunkt MEMPHIS MP66
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
ENGLISH
Changing basic settings in the settings menu
43
Ensure that all passengers in
the vehicle are sitting and re-
maining quiet.
Change to the "User Equalizer"
menu and call up one of the
user-defi ned equalizer settings
("User EQ 1 to 3") as described
in the preceding section.
Open the "User EQ 1/2/3"
menu as described on page 42.
Press the softkey
7 (next to
"Automatic") and follow the in-
structions on the display.
After a 5-second countdown,
you hear the teat noise and the
display intermittently shows "Si-
lence Please" and "Adjusting".
The automatic equalizer setting
nishes successfully if the dis-
play shows "Adjustment OK".
The equalizer setting is saved.
Any previously stored setting
under this equalizer setting is
overwritten. The new setting
can now be called up under the
corresponding equalizer set-
ting ("User EQ 1 to 3").
Manual:
As an alternative, you can man-
ually create the equalizer set-
ting without measurement mi-
crophone. In each of the six
frequency bands, you can select
one specifi c individual centre fre-
quency and fi nely adjust its level
and quality factor Q.
Insert a CD with which you are
very familiar.
Adjust bass, treble, balance,
and fader to zero.
Open the "User EQ 1/2/3"
menu as described on page 42.
Press the softkey
< (next to
"Manual").
First, select a frequency band
to be changed. First, change
the centre, then the treble, fol-
lowed by the bass.
"EQ Low 1" to "2": To change
the bass (20 to 250 Hz).
"EQ High 1" to "4": To change
the centre or treble (320 to
20,000 Hz).
The frequency spectrum is dis-
played. if you already changed
the level in another frequency
band, this change is visible in
the frequency spectrum. The
current centre frequency (Hz)
is highlighted.
EQ 1
2000Hz -8dB Q 1 High 4
Select the centre frequency to
be changed by pressing on
or
on the rocker switch 3.
In the two frequency bands "EQ
Low 1" and "2", you can select
one centre frequency each from
20 to 250 Hz.
01_BA_Memphis_US_gb.indd Menü4301_BA_Memphis_US_gb.indd Menü43 05.09.2007 9:58:12 Uhr05.09.2007 9:58:12 Uhr

Table of Contents

Other manuals for Blaupunkt MEMPHIS MP66

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blaupunkt MEMPHIS MP66 and is the answer not in the manual?

Blaupunkt MEMPHIS MP66 Specifications

General IconGeneral
Audio systemFM/MW/LW
MP3 playbackYes
DVD Audio playbackNo
Output power50 W
Product colorBlack
Audio output channels4.0 channels
Equalizer bands quantity6
Display typeTFT
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)179 x 52 x 160 mm

Related product manuals