Blaupunkt MEMPHIS MP66 Operating And Installation Instructions

Changing basic settings in the settings menu
48
Press the softkey next to the
image or the animation to be
replaced.
"Clock" replaces the wallpa-
per which appears if the radio
is switched off and the vehi-
cle ignition is switched on,
"Minimal Mode" replaces the
screen saver,
"Aux" replaces the wallpaper
which appears if "AUX" is se-
lected as audio source.
A progress bar illustrates the
transfer of the fi le. As soon as
the fi le has been transferred,
the display of the active audio
source appears. Your image or
animation now replaces the
factory setting.
Adjusting the display viewing
angle (Angle)
The angle at which the driver
looks at the display is depend-
ent upon, among other things,
the installation position of the de-
vice, the seating position, and the
physical size of the driver. You
can adjust the display contrast to
your viewing angle as follows.
Press the softkey
: (next to
"Angle").
The "Angle" menu opens and
the current display contrast is
shown.
➔
•
•
•
➔
On the rocker switch
3, press
or to increase the display
contrast.
On the rocker switch 3, press
or to decrease the display
contrast.
You can adjust the display
contrast in 13 increments from
–6 to +6.
➔
➔
01_BA_Memphis_US_gb.indd Menü4801_BA_Memphis_US_gb.indd Menü48 05.09.2007 9:58:13 Uhr05.09.2007 9:58:13 Uhr

Blaupunkt MEMPHIS MP66 Specifications

General

Audio system	FM/MW/LW
MP3 playback	Yes
DVD Audio playback	No
Output power	50 W
Product color	Black
Audio output channels	4.0 channels
Equalizer bands quantity	6
Display type	TFT

Weight and Dimensions

Dimensions (WxDxH)	179 x 52 x 160 mm