Overview of the operation
20
Switching Repeat title on/off
( RPT)
Press the softkey 8 (next to
"RPT").
The repeat mode is briefl y dis-
played.
"REPEAT TRACK": The cur-
rent track is repeated until
you quit repeat.
"REPEAT DIR": All titles in the
current folder are repeated
until you quit repeat.
"REPEAT CD": All tracks on
the CD are repeated until you
quit repeat.
"REPEAT OFF": The repeat
mode is switched off. How-
ever, the playback does not
stop with the last track. After
the last title in the last fold-
er, the playback is continued
with the fi rst title in the fi rst
folder.
The selected repeat mode is dis-
played on info line 2
F and indi-
cated by "RPT" at the side of the
display.
Scanning titles ( Scan)
You can scan all the titles of a
data carrier. The scan time is
selected in the settings menu
("Scan Time" menu item, see
page 54 and 55).
Press and hold the OK button
A for approx. two seconds.
➔
•
•
•
•
➔
All titles are scanned. The dis-
play shows "SCAN" and the dis-
play of the active audio source.
To cancel the scan:
Press the OK button
A.
The playback of the current
title is continued.
Buttons for menu operation
The device features menus which
allow you to change the preset-
tings or make a selection. The dis-
play shows up to six menu items.
Each menu item is assigned to
one of the six softkeys
7 to <.
The following buttons are re-
quired to operate the menus:
The MENU button
? calls up
the settings menu at any time.
If a menu consists of several
pages, you can consecutive-
ly scroll them using the NEXT
button
6.
If "Tuner" is selected as the au-
dio source, the TUNER button
2 calls up the "Tuner" menu.
The softkeys
7 to < are used
to select the menu items that
are shown on the display next
to the corresponding button.
In some menus, the rocker
switch
3 is used to change the
setting of a menu item.
This setting is immediately ef-
fective and automatically stored.
➔
•
•
•
•
•
01_BA_Memphis_US_gb.indd Bedienen2001_BA_Memphis_US_gb.indd Bedienen20 05.09.2007 9:58:09 Uhr05.09.2007 9:58:09 Uhr