Blaupunkt MEMPHIS MP66 Operating And Installation Instructions

ENGLISH
Changing basic settings in the settings menu
51
Changing clock settings ( Clock Settings)
In the "Clock Settings" menu, you can set the clock of the device as
well as change the display options of the clock.
Press the MENU button ?. The settings menu appears.
Press the softkey
< (next to "Clock Settings").
The "Clock" menu appears.
➔
➔
Setting the time ( Time Setting)
Press the softkey
7 (next to
"Time Setting").
The currently set time appears.
The hours are highlighted.
On the rocker switch
3, press
or to change the hours.
On the rocker switch
3, press
to change to the minutes.
On the rocker switch
3, press
or to change the minutes.
Press the OK button
A to fi n-
ish the input and to save the
time.
Note:
To quit the input without
changing the time, press the
ESC button
@.
➔
➔
➔
➔
➔
Switching the time display on/off
with switched-off device ( Off Clock)
The time can be displayed while
the device is switched off, if the
vehicle ignition is switched on. To
switch this time display on/off:
Press the softkey
8 (next to
"Off Clock").
: The time display is
switched on.
: The time display is
switched off.
➔
•
•
01_BA_Memphis_US_gb.indd Menü5101_BA_Memphis_US_gb.indd Menü51 05.09.2007 9:58:13 Uhr05.09.2007 9:58:13 Uhr

Blaupunkt MEMPHIS MP66 Specifications

General

Audio system	FM/MW/LW
MP3 playback	Yes
DVD Audio playback	No
Output power	50 W
Product color	Black
Audio output channels	4.0 channels
Equalizer bands quantity	6
Display type	TFT

Weight and Dimensions

Dimensions (WxDxH)	179 x 52 x 160 mm