25
Starting CD playback for the integrated CD player (no CD changer connected)
If an audio CD has been inserted and there is no CD changer connected,
Press CD.C ?.
The system will switch to the main CD menu and CD playback will begin. If there
is no audio CD inserted, a corresponding message will appear in the display.
Starting CD playback for the integrated CD player (CD changer connected)
If there is a CD inserted in the integrated CD player and a CD changer is con-
nected, the system will switch to the main CD menu when you press CD.C ?.
The CD source which was active last will begin to play.
If the last CD was played in the CD changer, the main CD changer menu will
appear.
If you want to activate the integrated CD player,
Press CD.C ? again.
The CD function menu for CD changer operation will appear.
Press the softkey marked
CD
.
If you have not inserted an audio CD into the integrated CD player, a lock sym-
bol will appear in front of the menu item CD and you will not be able to select this
menu item.
Switching the playing time indicator on/off
During CD playback, either the track number and the playing time or only the
track number will appear in the top line of the main CD menu. If you want to
switch between the playing time indicator and the track number display,
Press DSC ; to activate the DSC menu for CD operation and
Press the softkey marked
TIME
.
The playing time indicator will be switched on or off.
PLAY
is the default setting.
CD operation
CD changer function menu
CD DSC menu
To Next Page
Loading...
