Blaupunkt TravelPilot RNS 149 - Selecting the Waveband or Memory Bank; Starting Station Seek Tuning; Starting SCAN Seek Tuning, Radio Operation; Starting Travelstore

72
Selecting the waveband or memory bank
To select a different waveband or a different memory bank for radio operation,
Press or 2 on the remote control.
Starting station seek tuning
If the RDS function is switched on, you can use << >> 2 to select RDS stations
within reception range directly.
If the RDS function is switched off, you can use << >> 2 to start the automatic
station seek tuning up or down the waveband.
Starting SCAN seek tuning, Radio operation
To start SCAN seek tuning for radio operation,
Hold 2 pressed down on the remote control until SCAN seek tuning
begins.
Starting Travelstore
If you want to start Travelstore,
Hold 2 pressed down on the remote control until the Travelstore func-
tion begins.
Selecting tracks, CD and CD changer operation
In CD and CD changer operation, the keys << >> and 2 on the remote
control perform the same functions as the keys on the rocker switch 7.
For more information on selecting tracks, refer to the section on “Selecting tracks”
in the chapters entitled “CD operation” and “CD changer operation”.
RC06 remote control unit