Blaupunkt TravelPilot RNS 149 - Repeating Tracks or Cds (REPEAT); Starting the Repeat Function; Ending the Repeat Function; Activating the Repeat Function for One Track

65
Repeating tracks or CDs (REPEAT)
To repeat a track or a CD, activate the Repeat function.
Starting the Repeat function
Proceed as follows:
Select the track or CD you want to repeat,
Press CD.C ? to switch to the function menu and
Press the softkey marked REPEAT .
The track or the CD will be repeated until you end the Repeat function.
RPT will
appear in the status line of the main CD menu.
Ending the Repeat function
If you want to end the Repeat function,
Press ESC 9.
Activating the Repeat function for one track
If you want to repeat the current track only, you have to set the Repeat function
to
TRCK before you select it.
Press DSC ; to access the DSC menu and
Press the softkey marked RPT until TRCK appears beside it.
Switching on the Repeat function for a CD
To repeat an entire CD, you must set the Repeat function to CD.
Press the softkey marked RPT in the DSC menu until CD appears.
These settings will remain in effect for all of the repeat functions in CD changer
operation until you change them.
CD changer operation
CD changer function menu
CD changer DSC menu