Blaupunkt TravelPilot RNS 149 - Traffic Announcements During Route Guidance; Activating;Deactivating Voice Output; Activating;Deactivating the Memory of the Last 10 Destinations (LAST 10)

57
Navigation
Traffic announcements during route guidance
During route guidance, you can switch traffic information standby on or off, re-
gardless of which audio source is active: radio or CD changer (optional).
Activate the DSC menu for navigation,
Select the menu item TA and
Press OK 8.
The TA function will be activated or deactivated. The current status
ON or OFF
is marked.
Note: You can also switch the TA function on and off with the hotkey.
Activating/deactivating voice output
You can activate route guidance for navigation with or without voice output. The
voice output provides you with information on how far you must travel until it is time
to make a change in your direction and gives spoken driving recommendations.
Access the DSC menu for navigation and
Select the menu item LANGUAGE .
Press OK 8 until the desired option ON or OFF is marked. ON is the
default setting.
Activating/deactivating the memory of the last 10 destinations
(LAST 10)
If the LAST 10 memory is active, all of the destinations used in route guidance
will be stored automatically in the memory. You can also deactivate the LAST 10
memory.
Select the menu item LAST10 in the DSC menu for navigation .
Press OK 8 until the desired setting ON or OFF is marked. ON is the
default setting.
DSC menu for navigation
DSC menu for navigation