Blaupunkt TravelPilot RNS 149 - Ending the Repeat Function; Naming Cds; Entering the Name

28
CD operation
Ending the Repeat function
If you want to end the Repeat function,
Press ESC 9.
Naming CDs
The TravelPilot also allows you to name your CDs. The name can consist of up
to seven characters. The name you give to the CD will not be deleted when you
remove the CD from the CD player. When it is inserted again at a later date, the
name will appear in the display.
If you would like to name a CD,
Press CD.C ? to switch to the CD function menu and
Press the softkey marked NAME to access the CD Name menu.
Press the softkey marked EDIT .
The Edit menu will now appear.
Entering the name
Use / and << >> on the rocker switch 7 to move the cursor to the
first letter in the name.
The letter marked will appear magnified on the right of the display in the “Zoom”
window.
Press OK 8.
The letter will appear in the upper name line.
Select the remaining letters in the same way.
Once you have entered the name completely,
Mark the symbol and
CD function menu
Edit menu