Blaupunkt TravelPilot RNS 149 - Adjusting the Day;Night Display, the Viewing Angle, Contrast and Brightness; Automatic Switch to Night Display; Adjusting the Viewing Angle

74
Adjusting the day/night display, the viewing angle, contrast
and brightness
In the set-up for the display you can deactivate the automatic switch to night
display and adjust the brightness separately for the day and night display. You
can also adjust the viewing angle for the display.
Automatic switch to night display
If you want to deactivate the automatic switch to night display,
Activate the Set-up menu,
Select the menu item DISPLAY ,
Select the menu item DAY/NIGHT and
Press OK 8.
The setting will switch to OFF . To reactivate this setting, simply repeat the steps
as described above.
ON is the default setting.
Adjusting the viewing angle
Use the menu item
ANGLE to adjust the system display to the best viewing
angle for your purposes. To adjust the angle,
Mark the menu item ANGLE ,
Press OK 8 or << >> on the rocker switch 7.
Use << >> on the rocker switch 7 to adjust the angle and
Press OK 8 again.
Set-up/Basic settings
Set-up menu display