Blaupunkt TravelPilot RNS 149 - Switching between the Main Menu and the Function Menu; Activating the DSC Menu

61
The numbers or names of the first five CDs in the changer will appear in the
functional display area in the centre of the display.
In addition, there is a menu field which you can use to access the second page
of the main menu. Because the IDC - A09 can accommodate only five CDs, the
main menu will have no second page if an IDC - A09 has been connected.
Along the bottom line, the status line, you will see from left to right
- the number of GPS satellites received,
- symbols for the operating modes SCAN, MIX, RPT
- a symbol for the currently active audio source,
- the status of the TA function and
- a symbol, which indicates whether a navigation or an audio-CD is inserted in
the drive.
Switching between the main menu and the function menu
To switch between the main menu and the function menu for CD changer oper-
ation,
Press CD.C ? again.
The function menu will appear.
Activating the DSC menu
If you want to activate the DSC menu for CD changer operation,
Press DSC ;.
CD changer operation
CD changer function menu
CD changer DSC menu