Blaupunkt TravelPilot RNS 149 - Naming Cds; Entering the Name

68
Naming CDs
The TravelPilot also allows you to name your CDs. The name can consist of up
to seven characters. The name you give to the CD will not be deleted when you
remove the CD from the CD changer. When it is inserted again at a later date,
the name will appear in the display.
If you would like to name a CD,
Select the CD you want to name in the main menu,
Press CD.C ? to switch to the function menu and
Press the softkey marked NAME to access the CD Name menu.
Press the softkey marked EDIT.
Entering the name
The Edit menu will now appear.
Use / and << >> on the rocker switch 7 to move the cursor to the
first letter in the name.The letter marked will appear magnified on the
right of the display in the “Zoom” window.
Press OK 8.
The letter will appear in the upper name line.
Select the remaining letters in the same way.
Once you have entered the name completely,
Mark the symbol and
Press OK 8, or
Press down OK 8 for longer than two seconds.
After the name has been stored, the system will switch to the CD function menu.
The name will now appear in the functional display area of the main CD menu.
CD changer operation
CD changer function menu
Edit menu