Blaupunkt TravelPilot RNS 149 - Track Programming; Creating the Track Program

30
CD operation
Track programming
You can also program the tracks you would like to listen to on a CD. This allows
you to omit the tracks you do not want to play.
Creating the track program
To create the track program,
Press CD.C ? to switch to the CD function menu,
Press the softkey marked PROGRAM .
This activates the Program menu. If you have not yet selected any tracks, it will
not be possible to select the menu items
CLR PRG and RUN . They will be
marked with a lock symbol.
Use / on the rocker switch 7 to select the track you want played
first.
The tracks can be programmed in ascending order only, i.e. 1, 4, 7, etc., but not
3, 1, 4 etc.
Press the softkey marked ADD .
Select the next track in the program and
Press the softkey marked ADD .
Repeat these steps to program all of the tracks you want to include. This pro-
gramming will not be deleted when you remove the CD from the system. When
you insert the CD again at a later date, you will be able to use the track se-
quence you have programmed.
CD function menu
CD Program menu