EasyManuals Logo

Blodgett Export Series User Manual

Blodgett Export Series
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3
Delivery and Location
Installation
DELIVERY AND INSPECTION
All Blodgett ovens are shipped in containers to prevent
damage. Upon delivery of your new oven:
Inspect the shipping container for externaldamage.
Any evidence of damage should be noted on the
delivery receipt which must be signed by the driver.
Uncrate the oven and check for internal damage.
Carriers will accept claims for concealed damage if
notied within fteen days of delivery and the ship-
ping container is retained for inspection.
The Blodgett Oven Company cannot assume respon-
sibility for loss or damage su󰀨ered in transit. The car-
rier assumed full responsibility for delivery in good
order when the shipment was accepted. We are, how-
ever, prepared to assist you if ling a claim is neces-
sary.
OVEN LOCATION
The well planned and proper placement of your oven will
result in long term operator convenience and satisfactory
performance.
Place the oven at least 15.2 cm from the rear wall
and 15.2 cm from the side wall.
Place the oven in a properly ventilated area.
Place the oven under an exhaust hood, according to
Local andNational Installation Standards.
Position the oven so the supply plug is accessible.
Place the oven in an area that is free of drafts.
Keep the oven area free and clear of all combus-
tibles such as paper, cardboard, and ammable
liquids and solvents.
Do not place the oven on a curb base or seal to
awall. Thiswill restrict the ow of air and prevent
proper ventilation.
For gas models the location must provide adequate
clearance for the air opening into the combustion
chamber.
Before making any utility connections to this oven, check
the rating plate to be sure the oven specications are
compatible with the gas (if applicable) and electrical ser-
vices supplied for the oven.
Do not place strong sources of heat such as open
ame ranges, griddles, or charbroilers near the oven.
If such an instance exists, it is highly recommended
to purchase a heat shield, available from Blodgett.
Note that if temperatures are too high, a safety shut-
down may occur.
Failure to comply may invalidate the oven warranty.

Other manuals for Blodgett Export Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blodgett Export Series and is the answer not in the manual?

Blodgett Export Series Specifications

General IconGeneral
BrandBlodgett
ModelExport Series
CategoryConvection Oven
LanguageEnglish

Related product manuals