bluelab pH Controller Wi-Fi User Manual

1.0 Introduction & Overview
1.1 Features
Built-in Wi-Fi (with option to disable)
Local and remote adjustment of
control
settings via Edenic by Bluelab software
Data logging capability (via Edenic by
Bluelab software)
Automatic
control
and
monitoring
of
system pH with reservoirs up to 2,000 US
Gallons
/
7
,
6
0
0
Litres
Flashing high and low alarms stop further
dosing
Dosing
lockouts
to
protect
from
over
-
dosing
Auto
resume
dosing
on
restart
after power
loss
Simple push button pH calibration with
on screen
instructions
Large, easy to read display
Easy
to
navigate
menu to
program
and
adjust settings
‘
Plant
-
safe’ green back lit LCD with
adjustable brightness and contrast
Water resistant, wall mount design
13
foot
(4
meter)
acid/alkaline
resistant
tubing
supplied
Replaceable double junction Bluelab pH
Probe
Replaceable peristaltic pump and tubing
Separate stainless steel Bluelab
Temperature Probe (for pH ATC)
International
power
supply
What is Plant Safe? Green lights are safe for continued growth during a plant’s
fruiting stage when hours of darkness are required.
What are Dosing Lockouts for? They are a built-in safety feature that stops pH
dosing if an error is detected in the system (see FAQs for more detail).
1.2 What’s in the box?
1x Bluelab pH Controller Wi-Fi
1x Universal Power supply 24 VDC 0.3 A output
1x pH Probe with 2 m (6') cable
1x Temperature probe with 2 m (6') cable
1x Acid resistant (PTFE) tubing 4 m (13')
2x Straight joiners (PVDF) 1/8"
4x Mounting screws
2x pH Calibration solution sachets

bluelab pH Controller Wi-Fi Specifications

General

Brand	bluelab
Model	pH Controller Wi-Fi
Category	Controller
Language	English