bluelab pH Controller Wi-Fi User Manual

2.5 Bluelab pH Controller Menu
The ‘Settings’ button will take you into the menu.
To exit the menu, press ‘Settings’ again. Changes will not
be saved.
The ‘
∧
’ (up arrow) button allows you to move up the menu
items or increase a value shown.
The ‘∨’ (down arrow) button allows you to move down the
menu items or decrease a value shown.
To use the ‘Auto-repeat’ feature: Press and hold the ‘∧’ (up
arrow) or ‘∨’ (down arrow) button to scroll through
options. Release when you see the desired option or
value on the screen.
The ‘’ button allows you to select the desired option
shown on the display or save a chosen value.
The ‘CAL’ button is used to calibrate your pH probe. A
long press enters the calibration sequence.
Adjusting Settings
To adjust any of the settings, modes or alarms
1. Press the ‘settings’ button.
2. ‘∨’ or ‘∧’ to find the menu option required.
3. ‘’ to enter that menu item.
4. ‘∨’ or ‘∧’ to adjust the parameter.
5. ‘’ to save the change.
6. ‘Settings’ button to exit.
If you have adjusted a parameter and don’t want to save, you can let the menu
timeout or press the ‘settings’ button which will exit without saving.

bluelab pH Controller Wi-Fi Specifications

General

Brand	bluelab
Model	pH Controller Wi-Fi
Category	Controller
Language	English