bluelab pH Controller Wi-Fi User Manual

8.0 Specifications
8.1 Technical specifications
pH
Control parameter
pH - user selectable single direction (up or down)
Control range
0.1 – 13.9 pH
Dose
rate
120 ml per minute
Resolution
0.1 pH
Accuracy at 25°C/77°F
±0.1 pH
Calibration
Two or three point
(pH 7.0 and pH 4.0, and/or pH 10.0)
Temperature
compensation
Yes (if temperature probe is in the same solution as pH
probe)
Operating environment
0 - 50°C / 32 - 122°F
Power source
Input: 100
-
240 Vac, 50
-
60 Hz,
4 interchangeable plug types (USA, Euro, UK, NZ/AUS)
Output: 24
VDC 0.
3
A
Input Power
24VDC, 0.3 A (Must use power supply provided)
Screen display languages
English, Nederlands, Deutsch, Français, Español
User Manual languages
English
Certifications
CE, FCC, IC. Contains Wi
-
Fi/Bluetooth Module
IC: 21098-ESPS3WROOM1,
FCC ID: 2ACZ7
-
ESPS3WROOM1
Signal Range
Indoor / Urban: 66 feet / 20 meters
Outdoor : 164 feet / 50 meters
Radio Signals
Wi
-
Fi: 2.4 GHz (802.11 b/g/n)
Bluetooth: 5 (Low Energy)
System Requirements
Android (8.0 or later) or iOS (12 or later) Mobile phone
for Edenic Software. Internet connection for remote
access &
data
-
logging.
Tubing
Within the Peristaltic Pump
–
PharMed BPT
Supplied as additional
-
PTFE

bluelab pH Controller Wi-Fi Specifications

General

Brand	bluelab
Model	pH Controller Wi-Fi
Category	Controller
Language	English