EasyManua.ls Logo

Bluewater Pro - INSTALLATION; Before installation

Bluewater Pro
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
© Bluewater Group 2016
INSTALLATION
Install the water purifier in accordance with local regulations. If you are not sure,
contact a Bluewater dealer for aid. Bluewater has no responsibility for installation
of the water purifier.
Install the water purifier in a vertical position on a horizontal surface. Make sure
that tubing and cables can move freely when the water purifier is installed.
Plumbing must be done by an approved plumber. Obey local rules for plumbing
and sanitation if you do work yourself.
Use the tubing set that is supplied with the water purifier. Do not use used tubing sets again.
Before installation
Unpack Pro
Warning! Discard the packing material. It can cause injury to children if they play
with it.
Make sure that Pro shows no signs of damage, and that no accessories are missing. Tell the
Bluewater dealer about missing parts, damage and other problems.
Tell the transport company immediately if Pro is damaged during transport.
Figure 10. Unpack Pro
Figure 11.
Remove the plugs

Other manuals for Bluewater Pro

Related product manuals