Bluewater Pro - Requirements on feed water to water purifier

27
© Bluewater Group 2016
Requirements on feed water to water purifier
Do not install the water purifier if the water is microbiologically unsafe!
Pro 400B-HR
Pro 400BC-HR
Pro 400BCV-HR
Pro 400C-HF
Pro 400C-HR
Pro 400CV-HR
Pro 600C-HF
Pro 600CV-HR
230V 120V 230V 120V 230V
Temperature
2-30 °C
36-86 °F 2-35 °C 36-95 °F 2-35 °C
Feed water flowing pressure
1.5-10 bar
22-145 psi
1.5-10 bar
22-145 psi 2-10 bar
TDS
(Total Disolved Solids)
< 7500 ppm < 1500 ppm
< 1500 ppm
Water flow
> 8 l/min
> 2.1 gal/min
> 8 l/min
> 2.1 gal/min > 10 l/min
Conductivity
[μS/cm, 25 °C (77 °F)]
< 13 000 < 2000
< 2000
Hardness
< 20 °dH
<20.9 grains/gal
< 20 °dH
<20.9 grains/gal
< 20 °dH
pH
4-10 4-10 4-10
Turbidity [FNU]
< 0.5 < 0.5 < 0.5
Iron Fe
(I I)
/Fe
(I I I)
<1.5 / <0.3 mg/l
<1.5 / <0.3 ppm
<1.5 / <0.3 mg/l
<1.5 / <0.3 ppm
<1.0 / <0.3 mg/l
Manganese Mn
<0.3 mg/l
<0.3 ppm
<0.3 mg/l
<0.3 ppm
<0.3 mg/l
Chlorine Cl2
<1.0 mg/l <1.0 ppm <1.0 mg/l <1.0 ppm <1.0 mg/l