Need help?Do you have a question about the BMC Roadmachine and is the answer not in the manual?
General| Frame Material | Carbon |
|---|---|
| Fork Material | Carbon |
| Brakes | Disc |
| Wheel Size | 700c |
| Brake Type | Hydraulic Disc |
| Groupset | Shimano Ultegra Di2 |
| Tire Clearance | 33mm |
| Frame | Roadmachine Carbon |
| Fork | Roadmachine Carbon |
| Wheelset | DT Swiss E 1800 Spline |
| Tires | Varies by model |
| Groupset Options | Shimano Ultegra, Shimano 105 |
Important safety instructions, warnings, and intended use for the bicycle.
Details on compatible parts for brakes, drivetrain, and wheels.
General frame geometry and sizing chart for Roadmachine models.
Instructions for derailleur hanger installation and frame preparation.
Guide for routing electronic wires for Shimano Di2 systems.
Steps for installing and adjusting the seatpost, including cutting.
Step-by-step guide for assembling headset bearings and components.
Instructions for preparing the fork steerer tube, including cutting.
Instructions for installing the expander in the steerer tube.
Instructions for installing front and rear brake calipers.
Instructions for routing front and rear derailleur shifting cables.
Instructions for installing the bottom bracket and crankset.
Steps for assembling and orienting the chain catcher bracket and guide.
Installing downtube stopper, frame pouch, and locking mechanism.
Setup instructions for wheels, tires, and thru-axles.
Guidelines for fitting quick mount and full fenders.
Recommended methods for washing the Roadmachine safely.
Guidance on diagnosing and resolving common bicycle issues.
To Next Page
