BMC Roadmachine

Generalities
19
Roadmachine Owners Manual
General notes about assembly
Tools
Bike specific tools are required to perform the assembly of your Roadmachine and its components.
We recommend that you have a qualified bicycle mechanic correctly install these components.
Before you start assembling, make sure you are equipped with the following tools:
Hex keys:
• 2.5, 3, 4, 5, 6 mm
Torque wrench and bits
• Hex 2.5, 3, 4, 5, 6 mm
• Torx T25
Special tools
• Carbon saw blade Park Tool CSB-1.
• Park Tool IR-1.2 Internal Cable Routing Kit
Grease compounds:
• Grease gun or grease brush
• Fine assembly grease
• Friction paste
• LOCTITE® 243 Blue threadlocker
Operator protection:
• Eye protection
• Hands protection
Repair stand
!
WARNING: Clamping the frame or its components into a bike repair stand could damage its
structure or finish.
!
WARNING: Never clamp the frame by the top tube, downtube or seat tube.
Please use a traditional fork mount stand like the Park Tool PRS-22.2 Team Issue Repair Stand.