Generalities
7
Roadmachine Owners Manual
Component compatibility
Brakes :
• Front: flat mount for 160mm rotor only using BMC specific front brake adapter.
• Rear: flat mount brake boss 25mm thickness, compatible with Ø140mm / Ø160mm rotor
For more details, please refer to “Brake calipers assembly”, page 36.
Headset bearings:
• BMC by FSA, HS-B-13P
For more details, please refer to “Headset assembly”, page 43
Thru-axles:
• Front: BMC model CTS1048 12x100mm
• Rear: BMC model CTS1049 12x142mm
Shifting compatibility:
Roadmachine 01
Roadmachine 01 X
Roadmachine
Roadmachine X
Electronic groupsets
• Shimano 12s Di2, Sram AXS, Campagnolo Wireless
• Not compatible with Campagnolo EPS
Mechnical shifting groupsets
• Mechanical shifting systems with front derailleur de-
signed with integrated cable housing stop
⊖
For more details, please refer to “Electronic wires installation”, page 31.
Tires:
• Gravel or road tires
• Optimized for tires between 700x32c and 35c (32-35mm measured)
• Min 700x30c (for minimum pedals-to-ground clearance)
• Max 700x40c: up to 40mm measured (+4mm clearance around the tire)
• Max 700x35c (35mm measured) with fenders - depending on fender design
Crankset and chainrings:
• Press-fit bottom bracket BB86 (internal diamter of 41mm)
• Cranksets either 1x (single) or 2x (double)
• 1x: 48t compatible
• 2x: 52x36 or 50x34 or 48x31
• compatible for standard road chainline (not wide chainline)
• Max chainring size (2x): 53t
• Min chainring size: 31t
For more details, please refer to “Front derailleur hanger installation”, page 28
Rack:
• No rack is compatible with the Roadmachine 01 or Roadmachine.
Fenders
• Roadmachine 01: Some fenders with light fastening systems can be fitted onto the Roadmachine
(SKS Speedrocker or RaceBlades)
• Roadmachine: Full length fender compatible with fender mounts delivered with the bike.
To Next Page
Loading...
Need help?
General
