Generalities
23
Roadmachine Owners Manual
Recommended assembly procedure
If you are building a Roadmachine from scratch, the most convenient way is to follow the order and
the procedure described below. This is only the general procedure, all the separate steps and rec-
ommendations are described one by one in the following pages of this manual.
INFORMATION: Please go through all the instructions before starting. Following this sequence
will help you save time and facilitate the assembly.
• Sizing and parts selection
• Frame preparation
• Cockpit preparation
• Fork preparation
• Seatpost preparation
• Electronic wires installation
• Seatpost assembly
• Brake caliper assembly
• Headset and fork assembly
• Cockpit assembly
• Bottom bracket and crankset assembly
• Downtube storage and bottle cages
• Top tube storage
• Wheels and axles
• Fenders
To Next Page
