BMC Roadmachine

Detailed assembly instructions
53
Roadmachine Owners Manual
Storage items installation
Downtube internal foam stopper
i
INFORMATION: To avoid any item to slide at the bottom of the downtube and eventually get
stuck, it’s important to place the downtube internal foam stopper.
• Position the downtube internal foam stopper as instructed by the illustration bellow.
• Press it laterally and push it through the frame storage opening.
• Once in the downtube, push it towards the bottom bracket as far as you can.
Install the downtube foam stopper
Non-drive
side
Drive
side
Pouch - packing your essentials in the pouch
1 2 3
• Compress your inner tube to get the air out.
• Fold your inner tube to better match the length of the pouch. Make sure you fold the tube so its
valve tip does not push against the rubber to avoid tube perforation.
• Place the hard parts in the side pockets to avoid tube perforation or rattling.
i
INFORMATION: The frame storage pouch is included with Roadmachine 01 and Roadmachine 01
X. It can be purchased separately.
i
INFORMATION: your essential items size and arrangement should fit the pouch and allow the
zipper to be closed without force. Make sure you deflate completly your inner tube and carefully
arrange items to fit the pouch volume as best as you can.